MDT Technologies BE-GT20S.01, Техническое руководство

Страница: 18 / 90

Technical Manual
Glass Push Button II Smart & Push Button Smart 86
MDT technologies GmbH, Geschäftsbereich Gebäudeautomation
Phone: +49-2263-880
•
Fax: +49-2263-4588
•
E-Mail: knx@mdt.de
•
www.mdt.de
18
18
Adapt display brightness to ambience:
Yes
Brightness Brightness level 1 – 10
[Brightness level 8]
Sets the basic brightness of the
display
Minimum Brightness at Day 1 – 100 %
[10 %]
Setting the minimum brightness of
the display. Below this value, the
display is not dimmed during
daytime operation
Minimum Brightness at
Night 1 – 100 %
[3 %]
Setting the minimum brightness of
the display. Below this value, the
display is not dimmed during night
operation
Valid for both settings:
Overnight shutdown in
Standby

not active

threshold 1
(moderately dark)

threshold 2 (dark)

threshold 3 (very dark)
Setting of the display behavior for
the overnight shutdown in standby
mode
Table 8: Settings – Adaption to ambience
Principle of brightness adjustment :
The Glass Push-Button II Smart/Smart 86 has an internal brightness sensor and can dynamically
adjust the display brightness to the surroundings. The " brightness " parameter influences dimming
behaviour and the threshold at which the display is dimmed. The parameter for minimum brightness
defines the absolute lowest threshold up to which the display is dimmed.
In the programmed state, the menu for the brightness adjustment can be called up by pressing the
sensor surfaces 7 and 8 simultaneously:
In this menu the end user has the possibility to adjust the brightness settings independently (without
ETS). The settings are stored permanently in the device until the next transfer of the database.