MDT Technologies AKK-03UP.02, Техническое руководство

Страница: 48 / 78

Technical Manual Switch Actuator 3-fold, FanCoil
MDT technologies GmbH
•
51766 Engelskirchen
•
Papiermühle 1
Tel.: +49-2263-
880 • Fax: +49
-2263-4588
• knx@mdt.de • www.m
dt.de
48
5.4.3 Locking function
The following figure shows the available settings for the locking function:
Figure 32: Locking function
The following table shows the available settings for the locking function:
ETS-text
Dynamic range
[default value]
comment
Behavior at locking

Off

no change
Behavior at activating the
locking function
Behavior at unlocking

Off

Switch pulse
Behavior at deactivating the
locking function
Table 42: Locking function
A Channel is locked by sending a logical 1 to the locking object and further control is no longer
available as long as the channel is locked. By sending a logical 0 the channel can be unlocked again.
The following actions can be performed at locking/unlocking:

no change
The channel stays in the current state.

On
The channel is switched on.

Off
The channel is switched off.

switch pulse
The channel generates the switch pulse as parameterized.
The following table shows the available communication object:
Number Name Length Usage
4 Lock 1 Bit Object for activating/deactivating the locking
function
Table 43: Communication object locking function