MDS NETio Series, Руководство по установке и эксплуатации

Страница: 52 / 96

44 MDS NETio Installation & Operation Guide MDS 05-4457A01, Rev. A
Invisible place holder
Figure 2-28. Remote Management Menu
To configure a remote NETio Unit, enter the Unit ID for the remote then
select
Manage Selected Remote
.
Quick Start
Step #23:
Select A and enter the NETio Unit ID, then select B to configure.
Proceed to
Section 2.8.3 .
2.8.3 Over-the-Air Configuration of Remotes
Once Manage Selected Remote has been selected, an over-the-air con-
nection is made to the NETio Unit. All configuration steps can now be
carried out as if the user were directly connected to the NETio Unit.
When configuration is completed, remember to type * three times to
return to the AP configurator (see
Figure 2-29 ).
Figure 2-29. HyperTerminal Command Screen