MDS NETio Series, Руководство по установке и эксплуатации

Страница: 37 / 96

MDS 05-4457A01, Rev. A MDS NETio Installation & Operation Guide 29
2.4.1 ID Conflict List Menu
The Conflict List Menu, Figure 2-11 , is similar to the Network Menu,
but it lists only modules which have not been given a confirmed Module
ID. Each module must be “activated” through this menu. This menu dis-
plays all of the modules with conflicting Module IDs.
Quick Start
Step #11:
Select the letter associated with the Module in conflict to proceed to
the Conflict Menu (refer to
Section 2.4.2 ).
NOTE:
Modules on this list are functionally out-of-service until the
conflict is resolved by assigning each module a unique Module
Address.
Invisible place holder
Figure 2-11. ID Conflict List Menu
Pubs Note: Need to re-capture with conflicting modules shown
Four informational fields are shown on this screen:
•
Location—
Module’s “name” as defined by the user. The default
is the last four digits of the module’s serial number.
•
Req
(
uested
)
Address
—The Module ID currently configured for
this module.
•
Connection Type
—The connection each Expansion Module has
to the associated Base Module, for example: a WeXP connec-
tion or through the Power and Communication Bus (PCB).
Modules connected through the PCB will be displayed as
base
in the list.
•
I/O Layout
—Profile of I/O points available for use. (Profile is
provided for information only on this screen).