MDS NETio Series, Руководство по установке и эксплуатации

Страница: 29 / 96

MDS 05-4457A01, Rev. A MDS NETio Installation & Operation Guide 21
Invisible place holder
Figure 2-4. Starting Information Screen—Local Console Session
•
Device Name
—User-defined name for the unit (40 characters
maximum).
•
Device Location
—User-defined string commonly used to identify
the module’s location (40 characters maximum).
•
Unit
—Shows the NETio Base Unit's unique Unit ID. This value
defaults to the NETio Base Module serial number, but it can be
modified as needed.
•
Network Address
—Shows the Network Address of the MDS
entraNET network to which this Unit belongs. The Network
Address is essential for association to an MDS entraNET
Access Point. All Units in a system must have the
exact same
address.
•
Radio Status
—Shows the module’s entraNET radio association
as follows:
•
Associated
—Unit operating normally and associated (com-
municating) with the entraNET Access Point (AP).
•
Alarmed
—A alarming event has been logged and not cleared.
Note: If an alarm is present when this screen is displayed, an
“
A
)” will appear to the left of the
Device Status
field. (The
PWR
LED will also flash.) Pressing
A
on your keyboard takes
you directly to the
Current Alarms
screen.
•
Device Uptime
—Elapsed time since the transceiver was pow-
ered-up.
•
Current Firmware
—Version of firmware that is currently active in
the Unit.
•
Current User
—Privilege level at which you are logged in.