background image

Page 26 

IM777

Warranty

Consult your local McQuay Representative for warranty 
details. Refer to Form 933-43285Y. To find your local 
McQuay Representative, go to www.mcquay.com.

Warranty Return Material Procedure

Defective material may not be returned without permission 
of authorized factory service personnel of McQuay Interna-
tional in Minneapolis, Minnesota, (763) 553-5330. A "Return 
Goods" tag must be included with the returned material. 
Enter the required information to expedite handling and 
prompt issuance of credits. All parts must be returned to the 
appropriate McQuay facility, designated on the "Return 
Goods" tag. Transportation charges must be prepaid.

The return of the part does not constitute an order for 
replacement. Therefore, a purchase order must be entered 
through the nearest McQuay representative. The order should 
include part number, model number, and serial number of the 
unit involved.

Credit will be issued on customer's purchase order following 
an inspection of the return part and upon determination that the 
failure is due to faulty material or workmanship during the 
warranty period.

Replacement Parts

When writing to McQuay for service or replacement parts, 
refer to the model number and serial number of the unit as 
stamped on the serial plate attached to the unit. If replacement 
parts are required, mention the date of installation of the unit 
and date of failure, along with an explanation of the malfunc-
tions and a description of the replacement parts required.

Содержание Skyline IM777





























Отзывы: