User Manual
1
Programmable Thermostat
MH6-HP
Introduction
MH6-HP programmable thermostat is a Z-Wave Plus enabled device for indoor temperature
control. It is mainly applied to heat pump system for heating/cooling, with 3 modes easily
switchable: Schedule, Hold and Holiday. The device is of high reliability and practicability, and it
can support up to 3H/2C system. This product can be included and operated in any Z-Wave
network with other Z-Wave certified devices from any other manufacturers. All non-battery
operated nodes within the network will act as repeaters regardless of vendor to increase reliability
of the network.
Features
：
Elegant design with 4.3” LCD display
Individual programming Schedules:
7 days*4 time periods
Tempered glass panel with
Capacitive touch buttons
NTC thermistor
Built-in Z-Wave module
Specification
Power supply
：
AC24V, 50/60Hz
Power dissipation
：
2W
Dimension: 136*94*26mm
Output: <1A (Resistant load)
Temperature range: 41ºF -99ºF (5
℃
-37
℃
)
Display accuracy: ±0.5 ºC
Wiring: Terminals
Installation dimension: 60mm / 82mm (hole pitch)
Safety Information
To protect yourself and others from danger and to protect the device from damage, please read the
safety information before using it.
Important!
A qualified electrician with the understanding of wiring diagrams and knowledge of electrical
safety should complete installation following the instructions.
Before installation, please confirm the real voltage complying with the device’s specification.
Cut off any power supply to secure the safety of people and device.
During installation, protect the device from any physical damage by dropping or bumping. If
happens, please contact the supplier for maintenance.
