McLaughlin MCL 36C, Руководство по ремонту

Страница: 62 / 90

SERVICE AND MAINTENANCE
6.4 Combustion Air Filter
Undo clip fasteners 1.
Take off hood 2 and remove cartridge 3.
Clean cartridge 3.
Blow out from inside out with dry
compressed air (max. 5 bar), (or in difficult
cases, tap out, taking care not to damage
the cartridge, or wash according to
manufacturer’s instructions.
The amount of dirt in the air cleaner
depends on the amount of dust in the
air and the size of the air cleaner used.
If a high level of dust is anticipated, a
cyclone-type precleaner can be fitted
to the air cleaner.
Cleaning intervals will have to be
determined from case to case.
Through regular removal and replacement,
the gaskets on the filter cartridge can
become damaged. Check paper filter (light
showing through) and gaskets for damage.
Replace if necessary.
After five cleaner services or after two years
at the latest, replace safety cartridge 4
(never clean).
To do so:
- Undo hex. nut 5 and remove cartridge 4.
- Install new cartridge, insert and tighten
hex. nut.
Install cartridge 3, replace hood 2 and
do up clip fasteners 1.
Empty dust discharge valve 1 by pressing
apart lips of discharge slot as indicated by
arrows.
Clean discharge slot from time to
Remove any caked dirt by pressing together
the upper section of the valve.
6.4.4 Dry Type Air Cleaner
Dust Discharge Valve
Filter Cartridges
Clean cartridge (replace at least once a
year).
Never clean filter cartridge with
gasoline or hot fluids.
5.1.26