McLaren SUPER SERIES, Руководство пользователя

Страница: 80 / 268

Driving Controls
Handling and Powertrain Controls
2.24
NOTE: The information displayed on
the Driver Display will change
dependent on the handling mode
selected. See Handling and
powertrain display, page 3.14.
The mode selected will remain active, until
the selection is changed, the ignition is
switched off, or the Active Dynamics Panel is
deactivated.
NOTE: If all the following conditions
are not met when the selection is
made, the mode will not be
implemented until they are met:
•
No fault conditions existing
•
No vehicle dynamic or stability
interventions activated, e.g. electronic
stability control
•
Steering wheel in straight ahead
position, and not being turned, if the
vehicle is moving
When the Active Dynamics Panel is off, the
handling display on the Driver Display will
show Non-Active, see Handling and
powertrain display, page 3.14.
When the vehicle is in Non-Active mode, the
handling characteristics will match those of
Sport handling mode.
NOTE: In Track handling mode, the
electronic stability control system is
still in operation. For further
information, see Electronic stability
control (ESC), page 2.32.
Powertrain control
Selecting a mode
1. Press the ACTIVE button to switch on
the Active Dynamics Panel.
S
Sport /
Non-
Active
Suspension is stiffer, giving a
firmer ride coupled with
enhanced handling
characteristics.
Active aerodynamics
(Airbrake) becomes available
to further enhance vehicle
handling.
T Track
The suspension is at its
stiffest, giving almost race
car handling and ride
characteristics.
Active aerodynamics
(Airbrake) becomes available
to further enhance vehicle
handling. The Electronic
Stability Control warning light
is permanently illuminated.
p14.book Page 24 Tuesday, October 24, 2017 11:15 AM