McLaren SUPER SERIES, Руководство пользователя

Страница: 67 / 268

Driving Controls
Starting and Driving
2.11
Driving
Driving away
WARNING: Never turn the engine off
while driving, there will be no
assistance for the steering or the
foot brake. You will need more effort
to steer and brake and could lose
control of the vehicle and cause an
accident.
NOTE: Do not drive at high engine
speeds until the engine has reached
normal operating temperature.
NOTE: The doors will lock when the
vehicle reaches a speed of
approximately 9 mph (15 km/h). Auto
lock can be set on the Central Display,
see Automatic door locking,
page 4.18.
NOTE: During extensive parking
manoeuvres the steering assistance
might feel slightly stiffer. This is
normal and designed to protect the
steering system from overheating.
NOTE: When starting from cold, engine
idle speed may be increased and gear
changes may occur at higher engine
speeds. The catalytic converter will
reach its operating temperature
quicker and reduce engine emissions.
1. With the engine running, press and hold
the brake pedal.
2. Select drive or reverse gear, or initiate
an upshift by operating the gearshift
paddles. For more information, see
Gearshift paddles, page 2.20 and Gear
positions, page 2.17.
3. Keep the brake pedal depressed and
release the parking brake switch. The
red status light on the Driver Display
will be extinguished.
WARNING: If the parking brake is
manually released, the vehicle may
start to move.
NOTE: If the parking brake is not
manually released, it will
automatically release as the vehicle is
driven off forward, or in reverse as
long as the following conditions are
met:
•
All doors are closed
•
Driver’s seat belt is buckled
4. Carefully depress the accelerator pedal.
Engine warning light
This engine warning light illuminates
when the ignition is on and
extinguishes as soon as the engine is
started, provided no faults exist.
If the light illuminates while driving, an
engine management fault has been
detected and reduced engine performance
may be experienced. Stop the vehicle as
soon as safety permits and contact your
McLaren retailer immediately.
Limphome mode
Limphome mode activates automatically
when vehicle systems detect a fault which
may cause further damage unless vehicle or
system performance is restricted. Care
should be taken while driving in this mode.
Contact your McLaren retailer immediately.
Economical driving
Improved fuel economy can be achieved by
following this advice:
•
Accelerate smoothly and gently from a
standing start.
p14.book Page 11 Tuesday, October 24, 2017 11:15 AM