McLaren SUPER SERIES, Руководство пользователя

Страница: 49 / 268

Before You Drive
Washers and Wipers
1.39
Washers and Wipers
Windscreen wipers
1. Windscreen wipers off
2. Automatic wipe
3. Slow wipe
4. Fast wipe
NOTE: Switch off the windscreen
wipers in dry weather, dirt can cause
inadvertent wiper sweeps which could
damage the wiper blades or
windscreen.
Operating the windscreen wipers
1. Ensure the ignition is switched on.
2. Move the wiper stalk to the required
position.
NOTE: If the windscreen wipers are
switched on and the vehicle comes to
a halt, the windscreen wipers
automatically switch to intermittent
wipe, until the vehicle moves away.
Automatic wipe
A rain sensor, located on the windscreen
behind the interior mirror, measures the
quantity of water on the windscreen and
operates the wipers at the most appropriate
speed.
To select, move the windscreen wiper stalk
to the automatic wipe position
(2) .
The wipers will wipe once. The wipe
frequency then depends on how wet the
windscreen is.
Only select the automatic wipe position in
damp weather conditions or when it is
raining.
To adjust the sensitivity of the rain sensor,
see Wiper sensitivity, page 4.20.
Slow wipe
Move the wiper stalk to position (3) , to
operate the wipers at slow speed.
Return the stalk to position (1) to switch off.
Fast wipe
Move the wiper stalk to position (4) , to
operate the wipers at fast speed.
Return the stalk to position (1) to switch off.
Single wipe
1. For a slow single wipe, briefly push the
wiper stalk down and release. The
wipers will operate once at slow speed,
without washers.
p14.book Page 39 Tuesday, October 24, 2017 11:15 AM