McLaren 570SGT4, Техническое руководство

Страница: 77 / 153

570S-GT4_Technical-Manual_Mar-20_v7
76
Channel Upper and Lower Limits
Each channel has an upper and lower limit to the value it has been programmed to log. Some of these
channels are unitless, and therefore the
logged component is in. These are listed below;
6.1.2.1 NBrakePedalStatus
0- Pedal upstopped
1- Pedal pressed
2- Undefined
3- Default
6.1.2.2 NOilPressureSwitch
0- OK
1- Low pressure
2- Fault
3- Signal unavailable
7- Default
6.1.2.3 NPASfluidlevelstatus
0- Level OK
1- Level low
2- Undefined
3- Default
Channel Offset
to acquire their actual values. This is achieved by using
the Scaling Gain and Scaling Offset values in the table overleaf. The formula required is:
(Channel Value Scaling Offset)
Scaling Gain
Confirm the values obtained lie within the specified upper and lower limits. For further information,
please refer to: Channel Upper and Lower Limits.
BUS BAUD Rate
The bus baud rate for all channels is 500kBps.