24
The MXA60 Integrated Audio System has the flex-
ibility for future add-on components. The changes
could include the addition of a Powered Subwoofer,
larger Loudspeakers and/or higher power Power Am-
plifier.
Speaker Setting
Description
MXA60
Optimum Performance
MXA60
W/SUBWOOFER
MXA60 Loudspeaker reproduces
from 80Hz and above, MAIN/SUB
OUTPUTS are set to mono mode
LARGE
Other Loudspeakers connected in-
stead of the MXA60 Loudspeakers
NONE
External Power Amplifier and
Loudspeakers are connected to the
MXA60, Left and Right Speaker
Outputs are switched Off
Follow the steps below for changing the default
MXA60 configuration to accommodate the change.
1. Press and hold in the INPUT/TRIM Control (in-
ner knob) until the Setup Mode is active.
2. Rotate the INPUT/TRIM Control (inner knob) to
select “SETUP: SPEAKERS”. Refer to figure 12.
3. Rotate the TUNE/▲TRIM▼
Control (outer knob)
to select the Speaker Setup change. Refer to fig-
ures 13, 14 and 15.
desirable to remove from memory all or some of the
preset stations. To accomplish this perform the follow-
ing steps:
1. Press and hold in the INPUT/TRIM Control (in-
ner knob) until the Setup Mode is active.
2. Rotate the INPUT/TRIM Control (inner knob)
to select “SETUP: TUNER CLEAR PRESETS”.
Refer to figure 17.
3. Rotate the TUNE/▲TRIM▼
Control (outer knob)
to select one of four choices, refer to figures 18,
19 and 20:
NONE (default setting, No Presets are cleared)
AM (all AM Presets are cleared)
FM (all FM Presets are cleared)
All (all AM and FM Presets are cleared).
Note: The Presets are cleared when the Setup
Mode is exited.
4. Proceed to “Tuner Type” exit from the Setup
Mode, by pressing the INPUT/TRIM Control (in-
ner knob). The Front Panel Information Display
will revert back to its normal display.
The MXA60 AM/FM Tuner has three different Tun-
ing Modes. One of the Tuning Modes is Preset Tuning,
where favorite stations are entered into memory for
quick recall. Any preset station may be removed from
memory at any time. There are times when it may be
Tuner Clear Presets
Figure 17
SETUP: TUNER
CLEAR PRESETS: NONE
Figure 19
SETUP: TUNER
CLEAR PRESETS: FM
Figure 18
SETUP: TUNER
CLEAR PRESETS: AM
Figure 20
SETUP: TUNER
CLEAR PRESETS: ALL
Tuner Type
The MXA60 Tuner Type may be checked by perform-
ing the following:
1. Press and hold in the INPUT/TRIM Control (in-
ner knob) until the Setup Mode is active.
2. Rotate the INPUT/TRIM Control (inner knob) to
select “SETUP: TUNER TYPE”, indicating the
default setting. Refer to figure 16.
3. Proceed to “TUNER CLEAR PRESETS” or exit
from the Setup Mode, by pressing the INPUT/
TRIM Control (inner knob). The Front Panel
Information Display will revert back to its normal
display.
Figure 16
SETUP: TUNER TYPE
TM3
_ _ _ _ _ _ _
Speakers
Figure 12
SETUP: SPEAKERS
MXA60
Figure 13
SETUP: SPEAKERS
MXA60 W/SUBWOOFER
Figure 14
SETUP: SPEAKERS
LARGE
Figure 15
SETUP: SPEAKERS
NONE
Mode, by pressing the INPUT/TRIM Control
(inner knob). The Front Panel Upper Display will
revert back to its normal display.
Source Level
1
, con’t
Содержание MXA60 60th Anniversary
Страница 36: ...36 Photos ...