11
Tune to a station with the weakest signal and orient the
RAA2 Antenna for maximum signal with minimum
noise and distortion. After
the location is determined,
the RAA2 AM Antenna
may be secured to a suit-
able surface by using two
#6 1-3/4 to 2 inches (4.44 to
5.08cm) long screws, refer to
the illustration to the right.
Connecting Antennas
Mounting the RAA2 AM Antenna
Antenna Connections:
1. Using the supplied AM Antenna Shielded Cable,
connect one end into the RAA2 AM Antenna
jack and the other end of the same cable into the
MXA60 Tuner jack labeled RAA2 AM ANT.
Note: If a longer AM Antenna Cable is needed, refer
to page 4 “Connector and Cable Informa-
tion”.
2. Connect the supplied “T” shaped FM Dipole
Antenna to the MXA60 75 OHM FM ANT Con-
nector.
Note: Optionally, connect a 75 ohm coax cable from
a FM Antenna or cable system.
3. Proceed to “Connecting Components”.
Connecting Antennas
Tune to a station with the weakest signal and orient
the top of the “T” shaped Dipole Antenna for maxi-
mum signal with minimum noise and distortion. After
the location is determined,
the FM Dipole Antenna
may be secured to a suit-
able surface by using push
pins, refer to the illustration
to the right.
Mounting the FM Dipole Antenna
FM Dipole Antenna
Содержание MXA60 60th Anniversary
Страница 36: ...36 Photos ...