McIntosh MX123 Скачать руководство пользователя страница 5

Страница: 5 / 36

Trademark and License Information

The McIntosh MX123 incorporates copyright

protected technology that is protected by U.S. patents

and other intellectual property rights. The MX123

uses the following technologies:

This item incorporates copy protection technology

that is protected by U.S. patents and other intellectual

property rights of Rovi Corporation. Reverse

engineering and disassembly are prohibited.

Trademark Logo

License Information

Manufactured under license from Auro

Technologies. Auro-3D

and the related symbols

are registered trademarks of Auro Technologies.

All materials contained in this work are protected

by copyright law and may not be reproduced,

distributed, transmitted, displayed, published or

broadcast without the prior written permission of

Auro Technologies NV or in case of third party

materials, the owner of that content. You may not

alter or remove any trademark, copyright or other

notice from copies of the content.

Auro Technologies: mail info@auro-technologies.

com, phone +32-(0)-14314343, fax +32-(0)-

14321224, www.auro-technologies.com.

Manufactured under license from Dolby

Laboratories. Dolby, Dolby Atmos, Dolby Audio,

Dolby Surround, Dolby Vision and the double-D

symbol are trademarks of Dolby Laboratories.

HDMI, the HDMI Logo and High-Definition

Multimedia Interface are trademarks or registered

trademarks of HDMI Licensing LLC in the United

States and other countries.
The Bluetooth

word mark and logos are registered

trademarks owned by Bluetooth SIG, Inc. and

any use of such marks by McIntosh Laboratory is

under license. Other trademarks and trade names

are those of their respective owners.

The Wi-Fi CERTIFIED Logo and the Wi-Fi

CERTIFIED On-Product Logo are

registered trademarks of the Wi-Fi-Alliance.

Trademark Logo

License Information

Manufactured under license from Audyssey

Laboratories™. U.S. and

foreign patents pending. Audyssey MultEQ

XT32, Audyssey Dynamic

, Audyssey Dynamic Volume

and Audyssey

LFC™ are registered

trademarks of Audyssey Laboratories.
Apple, AirPlay, iPad, iPad Air, iPad Pro, and

iPhone are trademarks of Apple Inc.,

registered in the U.S. and other countries. The

trademark “iPhone” is used in Japan

with a license from Aiphone K.K.

Manufactured under license from IMAX

Corporation. IMAX

is a registered trademark of

IMAX Corporation in the United States and/or

other countries.

For DTS patents, see http://patents.dts.com.

Manufactured under license from DTS, Inc. (for

companies headquartered in the U.S./Japan/

Taiwan) or under license from DTS Licensing

Limited (for all other companies). DTS, DTS:X

Pro, DTS:X, and the DTS:X logo are registered

trademarks or trademarks of DTS, Inc. in the

The Spotify Software is subject to third party

licenses found here: https://www.spotify.com/

connect/third-party-licenses.

Pro

Содержание MX123





































Результаты поиска

Содержание MX123

Отзывы:

Похожие инструкции для MX123

Бренды по названию

Популярные бренды

McIntosh MX123, Руководство пользователя

Результаты поиска

Содержание MX123

Отзывы:

Похожие инструкции для MX123

Бренды по названию

Популярные бренды