McElroy SmartFab 125, Руководство оператора

Страница: 14 / 32

Overview
2 - 5
Jaw Clamp Handles
At the end of each jaw frame are adjustable handles for
clamping and unclamping of pipe and fittings. By pulling out on
the handles, the handle position can be adjusted.
Rotating the handle will open and close the jaws on the jaw
frame.
TX04854-12-14-15
Jaw Frame Lock Handles
At both ends of three of the jaw frames are adjustable handles
for locking and unlocking the position of the jaw frames. By
pulling out on the handles, the handle position can be adjusted.
Rotating the handle will loosen and tighten the jaw frames on the
guide rods of the machine.
TX04855-12-14-15
Set Up Gauges
The machine comes with set up gauges for use during the set
up calibration procedures. There is a set up gauge to match the
appropriate heater adapters. The set up gauges will have a marking
that will match the marking of the heater adapters. There are 3 different
gauges on the block.
1) Pipe Side Heater Stop - to measure the long heater stop distance.
2) Fitting Side Heater Stop - to measure the short heater stop
distance.
3) Stop Block - to measure the distance between the two inner jaw
frames.
The gauges are stored with the additional depth stars when not in use.
TX04856-03-14-16
CD0
14
13-1
1-2
0-1
5
CD0
1444-1
1-30-1
5
CD0
1444-1
1-30-1
5
Jaw Frame Lock
Handles
Jaw Clamp Handles
Pipe Side Heater Stop
Fitting Side
Heater Stop
Stop Block