McElroy SmartFab 125, Руководство оператора

Страница: 9 / 32

Fusion Procedures
Obtain a copy of the pipe manufacturer's procedures or appropriate
joining standard for the pipe being fused. Follow the procedure carefully,
and adhere to all specified parameters.
NOTICE:
Failure to follow pipe manufacturer's procedure could
result in a bad joint. Always follow pipe manufacturer's
procedures.
TX04469-10-24-12
WR000
79-1-2
4-9
6
Fusion Equipment Safety
1 - 3
Electrical Safety
Always ensure equipment is properly
grounded. It is important to remember that
you are working in a wet environment with
electrical devices. Proper ground connections
help to minimize the chances of an electric
shock.
Frequently inspect electrical cords and unit for damage. Have
damaged components replaced and service performed by a
qualified electrician.
Do not carry electrical devices by the cord
NOTICE : Always connect units to the proper power source as listed on the
unit, or in the owner's manual.
TX00105-6-12-13
¡ATENCIÓN!
WR00055-4-7-9
3
WR0002
5-1
1-30-9
2
Heater is Hot
The heater is hot and will burn clothing and skin. Use
care when heating the pipe and fitting.
NOTICE : Use only a clean dry lint free non-synthetic cloth to clean the
heater adapters.
TX04848-12-14-15
Pinch Points
Moving components of the machine can create pinch
points. Use caution while operating the machine not to
expose body parts to pinch points. Pinch points may
cause minor to moderate injury.
TX04847-12-14-15
WR00030-2-1
0-9
3
WR00
11
4-1
1-30-1
5
¡CUIDADO!
ОСТОРОЖНО
ATTENTION
¡CUIDADO!
ОСТОРОЖНО
ATTENTION