McElroy SmartFab 125, Руководство оператора

Страница: 20 / 32

Connecting to Power
All electrical equipment and power sources must be located in a
non-explosive atmosphere. Failure to do so will result in serious
injury or death.
The heater must be connected to a source rated for the device's power
requirements. The device has a plate or label with the device's power requirements.
Consult generator sizing form in the back of this manual to determine the proper
size generator to power all electrical equipment.
TX04860-12-14-15
Read Before Operating
Before operating this machine, please read this manual thoroughly, and
keep a copy with the machine for future reference.
When fusing thermoplastic pipe materials, refer to the pipe manufacturer's
suggested procedures or appropriate joining standard.
The pipe and fitting can be fused in either side of the machine removing
the need to reposition the machine.
TX04858-12-14-15
Level Machine
Use a torpedo level along the top of the jaw frames and adjust the
leveling legs
TX04859-12-14-15
Fusion Procedure
ST
OP-1
2-2
2-9
2
4 - 1
CD0
144
1-1
1-30-1
5
CD0
1456-1
2-1
0-1
5
¡PELIGRO!
Prepare Heater
Heater is not explosion proof. Operation of heater in an
explosive atmosphere will result in serious injury or death.
Install socket fusion heater adapters if not already installed.
Ensure the pipe heater adapter goes on the side with the long heater stops.
NOTICE:
The heater should never be used without socket fusion heater
adapters installed. Refer to the "Maintenance" section of this manual for
installation procedure.
Plug heater into a proper power source.
Allow heater to warm-up to operating temperature.
Refer to the "Maintenance" section of this manual for instructions on how
to adjust heater temperature.
TX04861-12-14-15
¡PELIGRO!
CD0
14
11-1
1-30-1
5
CD0
1440-1
1-2
3-1
5
Leveling legs