McCrometer ML255, Инструкция по установке, эксплуатации и обслуживанию

Страница: 36 / 50

MAIN MENU DESCRIPTIONS
Copyright © 2018 McCrometer, Inc. All printed material should not be changed or altered without permission of McCrometer.
Any published technical data and instructions are subject to change without notice. Contact your McCrometer representative
for current technical data and instructions.
www.mccrometer.com
3255 WEST STETSON AVENUE • HEMET, CALIFORNIA 92545 USA Printed In The U.S.A.
TEL: 951-652-6811 • 800-220-2279 • FAX: 951-652-3078 Lit. # 30122-46 Rev. 1.2 / 5-31-18
34
9.8 Menu 8 - Display
Language
Converter language. This sets the converter language EN (English), IT (Italian),
FR (French), SP (Spanish), or DE (German).
D.Time
Energy Saving Display Time will turn the display off after 20-250 seconds. 60 is
default.
Quick start
Quick Start Menu enable. This setting toggles between on and off. If set to "off" it will hide the quick start menu.
Disp.lock
Locks the front panel display so you can’t switch between displays
T+ reset
Totalizer reset, forward. Resets the forward flow totalizer.
T- reset
Totalizer reset, reverse. Resets the reverse flow totalizer.

 
 
  
 
 
 

 
 
  
 
 
 

 
 
  
 

 

 
 
  
 

 

 
 
  
 
 
 

 
 
  
 
 
 

 
 
  
 

 

 
 
  
 

 
To reset the totalizer:
1. Highlight the totalizer reset option to be reset.
2. Quick press the Enter/Esc key. The display will show
“EXECUTE?”.
3. Press and hold the Enter/Esc key to continue. The
display will flash "Done".
The visualization pages will now show the totalizer as
reset.
NOTE: There is no function to reset the Net Totalizer. To
reset the Net Totalizer, both the "+" and the "-" totalizers
must be reset.
9.7 Menu 7 - Communication
IF2 pr.
Protocol for IF2 port. Set to DPP or HTP. This sets the protocol used for
communication to the IF2 device, either Data Packet Protocol (DPP) or Hyper
Text Protocol (HTP). Default is DPP. This should not be changed.

  