Administrator’s Guide
101
Sending Alert Messages
This tells each VirusScan component to send an alert event to the Alert
Manager client utility each time it detects a virus or malicious object. The client
utility, in turn, passes the alert message to the Alert Manager server you
designate. If you do not set your software to generate alert messages in the first
place, the client utility will have nothing to pass to the Alert Manager server
for distribution.
To start and configure the Alert Manager utility, follow these steps:
1. Click
Start
in the Windows taskbar, point to
Programs
, then to
Network
Associates
. Next, choose
VirusScan Alerting Configuration
.
The Alert Manager Client Configuration page appears.
2
Figure 5-1. Alert Manager Client Configuration dialog box
2. Verify that the
Disable Alerting checkbox
is clear. This activates the
remaining options in this dialog box.
Select this checkbox only if you want the Alert Manager Client
Configuration utility
not
to pass alert messages from your anti-virus
software to the Alert Manager server or to your Desktop Management
Interface (DMI) administrative software. By default, this checkbox is
clear. McAfee recommends that you leave it clear so that the client sends
alert messages out.
NOTE:
If you use McAfee ePolicy Orchestrator software in your
network environment, VirusScan software will still send alert
messages to the ePolicy Orchestrator reporting component whether
you activate or disable alerting here.
Содержание VIRUSSCAN 4.5 -
