Installation and use
23
MCK 3000
7. Maintenance
This chapter describes how to perform routine maintenance and extraordinary
maintenance operations.
Routine maintenance
refers to those operations which must be carried out
periodically. As they do not require specific skills, they can be carried out by the
users (operators, etc.).
Special maintenance
refers to unforeseeable operations due to mechanic or electric
failures. They require specific technical skills, so they should be exclusively carried
out by qualified personnel (maintenance personnel etc.).
7.1 Routine maintenance
Routine maintenance consists in cleaning the instrument.
Clean the instrument with a wet cloth and mild detergent to avoid erasing the
serigraphs on the panel.
!
Warning
•
Do not use pressurised water jets.
•
Do not use abrasive products or solvents.
•
Do not press on the keyboard with pointed or hard objects as it
could damage the polyester film, compromising the impermeability
of the keyboard.
7.1.1 How to protect the main connector
In the event of prolonged disuse of the Monitor, if you wish to disconnect the main
signal connector from the wiring harness. We recommend isolating both connectors
(of the Monitor and of the wiring harness) with Nylon.
If instead the connectors of the Monitor and the wiring harness are NOT
disconnected, no protection is required.
7.2 Extraordinary maintenance
!
Warning
Special maintenance must only be performed by authorised personnel.
