MCK 3000
Installation and use
MCK 3000
Reset the totalisers as follows:
▪
partial area (first arrow from the right),
▪
total area (second arrow from the right) and
▪
linear metres covered (third arrow from the right)
the relative key must be kept pressed for more than <3> seconds and only with the
machine stopped.
NOTE
: the totalisers are all independent of each other and therefore, can be
zeroed independently from each other.
EXAMPLE:
if you want to reset the partially worked area, press the
key repeatedly until
the first arrow from the right lights up.
Press the
key again without releasing it until the parameter is reset.