MCK 3000
Installation and use
MCK 3000
3.2.3 Installing the reflection seed sensor (if present)
The seed sensor is used if the monitor is installed on a self-levelling combine
harvester.
Secure the seed sensor in a stable way on the right or left side of the pipe, using the
bracket (supplied) with the lens facing the ground, and the optical axis perpendicular
to the ground, at a distance of no more than 1.10 metre (see Figure 7).
!
Warning
The sensor cable should be covered with a rubber sheath.
Figure 7. Installing the seed sensor.
Seed sensor optical beam
Seed sensor
MAX.
distance
1.10 m
