MBW 473-RP2, Руководство по эксплуатации и обслуживанию

Страница: 45 / 75

MBW 473 Manual English V5.0 39
5.8 Diagnostic Functions
System Information
When you press the System Info button in the
Diagnostic Functions Menu a window appears
which gives you information about the model of the
instrument, the version of the software and the se-
rial number of the instrument.
Ice Test
The measuring accuracy can be checked with a simple, built-in test. The test may be performed at any
time, and is recommended whenever the results of your normal measurements do not correspond to
expectations, and you suspect that there may be an error with the instrument.
The mirror must be visible to perform the Ice Test. If you have an SH2, SH3 or SHX
measuring head, remove the measuring head cover prior to the Ice Test as described in
section 8.2
’Mirror Cleaning’. If you have an RP2 measuring head, disassembly is not
necessary as the mirror is visible from the outside.
The Ice Test cannot be started as long as a dew/frost point measurement is in progress.
Make sure that the bar on the
Dew/Frost Control key is grey.
Press the menu selection key on the lower right to select the
Diagnostic Functions menu. Then press the Ice Test but-
ton.
Please note that the Ice Test will start immediately
after the
Ice Test button has been pressed.