MBS HELLIA, Инструкция по установке и эксплуатации

Страница: 21 / 38

INSTRUCTIONS FOR INSTALLATION AND USE
To avoid restarting the stove twice
use the option LOAD INITIAL to start
the dispenser spiral and loading the
pellet without starting the stove!
LOAD INITIAL option can’t start until
the display reads OFF! The starting
option process is as follows: load the
pellet into to storage via LOAD
INITIAL command (Image 24) and
load the dispenser.
ENGLISH SERBIAN
Image 24
The LOAD INITIAL command is in
menu 07, it can be reached by
pressing the SET key, and then use
key 5 to get to menu 07 and press the
SET key again and the upper section
will show the option OFF (Image 24).
Image 24
Then use key 1 to start the spiral (the
exhaust fan will also start) for 90’’
(Image 60).
Image 25
Stop the dispenser by pressing the
key 4.
Once the pellet starts loading into the
fire-pot it will mean that the dispenser
is loaded and the stove can be started
according to description in chapter 1.
The spiral can be started with this
option if the pellet is blocked until it
unblocks!
9.7. Remote Control
You can use the remote control
(Image 39) to turn the stove on and
off (key 3), set the temperature
(thermometer symbol – keys 1 and
2) and the heating capacity (fire
symbol – keys 6 and 5) and to
enter the menu (key 4).
Symbol
+
is for increasing, and
symbol
‒
is for decreasing the
temperature and the capacity.
The remote control uses the
CR2015 (3V) battery.
The remote control range is 2.5 m.
NEnu
01
TRENUTN
O
UBACUJE
OF
F OFF
NEnu
01 P1
TO
LOAD
LOAD
POKRETAN
INICIAL
DOZERA
NEnu
07 NEnu
07
POKRETA
N DOZER
P-
4 18.5°
C
90
'' 90 ''
18.5°C P-
4 LOAD
INITIAL