Pellet Stove -
HELLIA -
8kW
9.4. Achieving the Desired
Temperature During Operation
Once the set room temperature is
achieved, the stove goes to the
economy mode where it saves fuel,
and the display shows the message
WORK MODULAT as shown in Image
21.
ENGLISH
SERBIAN
Image
21
9.5. Turning the Stove Off
Turn off the stove by pressing key 4
for 4 seconds. The feeder stops
working, the exhaust fan stays on for
about 10 minutes until the exhaust
gases’ temperature drops below the
set value, while the flame is
extinguished and the stove
temperature is lowered. Also, the
fresh air fan additionally blows out the
air until the stove cools down. This
activity is followed by the display
message CLEANING FINAL, which
includes indicators that the fan is
running, as shown in Image 22.
Image 22
Once the stove has cooled down, the
fans stop working and the message
OFF appears on the display indicating
that the stove has been turned off as
shown in Image 23.
Image 23
It will be possible to restart the stove
5-7 minutes after it was turned off.
9.6. Starting the Spiral and the
Dispenser without Starting the
Stove Due to Lack of Pellet
If the stove turns off due to the lack of
pellet in the storage and the
dispenser, the display will show the
corresponding message and alarm
(more details in chapter “Alarms”).
In this case, the pellet dispenser spiral
is emptied and the stove may not
immediately start when starting again
because of a small amount of pellet!
M
CISCENJ
E
ZAVRSN
O
CLEANIN
G FINAL
22°C
P-4
22°C
P-
4
08:3
3
08:3
3
22:30
21.5°C P-
4 OFF
22:30
21.5°C P-
4 OFF
WORK
RAD
MODUULAT
EKONOMIK
P-
4
12:0
0
22°C
P-
4
12:0
0
22°C
Содержание HELLIA
