MBM FC 10 PLUS, Руководство по обслуживанию

Страница: 62 / 74

61
H
Numeric
key
0 㹼 999 Not used
S
Paper feed time lag
Numeric
key
0
㹼
999 Not used
U
Minimum feed gap
Numeric
key
0 㹼 999
Not used
The time limit will decrease when the
setting is decreased, or will increase
when the setting is increased.
A short time limit will result in
inaccurate alignment of ejected sheets.
O
Not used 2,3key
㸫
Not used
r
Initial value of photo
check time Numeric
key
0
㹼
999
Note that the paper jamming or heavy feed
detection function will not properly
operate if the setting is decreased.
SH
Speed (high)
Numeric
key
0 㹼 99
Conveying speed:1,490mm/s
SL
Speed (low)
Numeric
key
0 㹼 99
Conveying speed:900mm/s
Note that paper jamming will occur in the
Staple punch if the setting is changed.
J
Left side ejection
when there is no cable
connected with the
post-processing
equipment
2 key 0 or 1
Not used
[J010] will enable external ejection
without any option.
Y
Error logic 1,2,3key 0 or 1
Not used
Do not change the setting because
options may malfunction.
*1:
Of the system settings, L, n, and G will be automatically changed by detection of the connection of the
machine for subsequent treatment.
When an optional staple (SP) is connected, it is not necessary to correct the value.
Note that the system settings will be changed only once when the machine for subsequent treatment is
first connected.
After that, the system settings will not be rewritten even if the same option is connected or disconnected.
System
parameter
Post-processing equipment
None SP
L L 3.0 L 0.0
n n 5.0 n 5.0
G G160 G240