Mazda 6 2016, Руководство пользователя

Страница: 20 / 610

Black plate (20,1)
CAUTION
Ø
Before folding a rear seatback,
make sure that the rear seat
warmer switch is off. If a rear
seatback is folded while the rear
seat warmer is in operation, it
may heat the seat excessively and
damage the seat surface.
Ø
Do not use organic solvents to
clean the seat. It may damage the
seat surface and the heater.
NOTE
l
Use the seat warmer when the engine is
running. Leaving the seat warmer on for
long periods with the engine not running
could cause the battery power to be
depleted.
l
(Front)
If the ignition is switched off while the seat
warmer is operating (High, Mid or Low)
and then switched ON again, the seat
warmer will automatically operate at the
temperature set before switching off the
ignition.
l
(Rear)
When the ignition is switched OFF during
seat warmer operation, the seat warmers
are automatically turned off at the next
engine start. To turn the seat warmers back
on, press the seat warmer switch again.
l
The temperature of the seat warmer cannot
be adjusted beyond High, Mid and Low
because the seat warmer is controlled by a
thermostat.
q
Seat Position Memory (Driver's
seat)
í
The seat position memory function allows
you to program the driver's seat to a
desired seat position and to call up a
programmed position with the simple
touch of a button.
CAUTION
Do not place fingers or hands around
the bottom of the seat while the seat
memory function is operating. The
seat moves automatically while the
seat memory function is operating
and fingers or hands could get
pinched and injured.
SET button
The seat position can be programmed or
operated using the following operations.
l
Operation of the buttons on the side of
the seat.
l
Operation using the key.
2-8
Essential Safety Equipment
í
Some models.
Seats
Mazda6_8EA2-EA-14K_Edition5 Page20
Friday, November 27 2015 4:55 PM
Form No.8EA2-EA-14K