Mazda 6 2016, Руководство пользователя

Страница: 474 / 610

Black plate (474,1)
2. If you are changing the right bulb, start
the engine, turn the steering wheel all
the way to the left, and turn off engine.
If you are changing the left bulb, turn
the steering wheel to the right.
3. Pull the center of each plastic retainer
and remove the retainers.
Removal
Installation
4. Turn the screw counterclockwise and
remove it, and then partially peel back
the mudguard.
5. Disconnect the connector from the unit
by pressing the tab on the connector
with your finger and pulling the
connector downward.
6. Turn the socket and bulb assembly to
remove it. Carefully remove the bulb
from its socket in the reflector by
gently pulling it straight out of the
socket.
7. Install the new bulb in the reverse order
of the removal procedure.
Brake lights, Taillights, High-mount
brake light, Side-turn signal lights,
Rear side-marker lights (With LED
headlights)
The LED bulb cannot be replaced as a
single unit because it is an integrated unit.
6-52
Maintenance and Care
Owner Maintenance
Mazda6_8EA2-EA-14K_Edition5 Page474
Friday, November 27 2015 5:0 PM
Form No.8EA2-EA-14K