Mazda 6 2016, Руководство пользователя

Страница: 493 / 610

Black plate (493,1)
NOTE
l
Because genuine leather is a natural
material, its surface is not uniform and it
may have natural scars, scratches, and
wrinkles.
l
To maintain the quality for as long as
possible, periodical maintenance, about
twice a year, is recommended.
l
If the leather upholstery comes into contact
with any of the following, clean it
immediately.
Leaving it uncleaned could cause
premature wear, mold, or stains.
l
Sand or dirt
l
Grease or oil, such as hand cream
l
Alcohol, such as in cosmetic or hair
dressing items
l
If the leather upholstery gets wet, promptly
remove moisture with a dry cloth.
Remaining moisture on the surface may
cause deterioration such as hardening and
shrinkage.
l
Exposure to direct sunlight for long periods
may cause deterioration and shrinkage.
When parking the car under direct sunlight
for long periods, shade the interior using
sunshades.
l
Do not leave vinyl products on the leather
upholstery for long periods. They may
affect the leather quality and coloring. If
the cabin temperature becomes hot, the
vinyl may deteriorate and adhere to the
genuine leather.
q
Plastic Part Maintenance
CAUTION
Do not use polishing agents.
Depending on the product
ingredients, they could cause
discoloration, stains, cracks or
peeling of the coating.
q
Instrument Panel Top (Soft pad)
Maintenance
Extremely soft material is used for the soft
pad surface. If the soft pad surface is
rubbed harshly with a dry cloth, it could
result in the surface being damaged and
leaving white scratch marks.
1. Wipe the soiled area with a soft cloth
soaked in a mild detergent (approx.
5%) diluted with water.
2. Wipe off the remaining detergent using
a cloth soaked in clean water and
wrung out well.
q
Active Driving Display
Maintenance
í
The combiner and mirror surface have a
special coating. When cleaning it, do not
use a hard cloth, a cloth with a rough
surface, or cleaning detergent. Use a fine-
textured, soft cloth.
If a chemical solvent gets on the combiner
or mirror surface, wipe it off immediately.
Otherwise, they could be damaged and the
surface coating could be scratched.
q
Panel Maintenance
If a panel becomes soiled, wipe it off with
a soft cloth soaked in clean water and
thoroughly wrung out.
If some areas require further cleaning, use
the following procedure:
1. Wipe the soiled area with a soft cloth
soaked in a mild detergent (approx. 5
%) diluted with water.
2. Wipe off the remaining detergent using
a cloth soaked in clean water and
wrung out well.
Maintenance and Care
Appearance Care
6-71
í
Some models.
Mazda6_8EA2-EA-14K_Edition5 Page493
Friday, November 27 2015 5:1 PM
Form No.8EA2-EA-14K