BRAKE FLUID PRESSURE SENSOR INSPECTION
http://am.mazdaserviceinfo.com/emazda/dealersystem/service/esi/en_us/SM/2013/CX5/mv/books/mvw04/html/id041500801500.html[1/7/13 9:37:01 AM]
9. Bleed the brake line and the
SSTs
of air. Bleed the air form the
SSTs
using bleeder screw A.
10. Connect the M-MDS to the DLC-2.
11. Select the “BRK_F_P_R” PID.
12. Start the engine.
13. Depress the brake pedal, and confirm that the fluid pressure value of the
SST
(Gauge) and
the value shown on the M-MDS are equal
If the fluid pressures are different, replace the DSC HU/CM. (See
.)
14. After the inspection, remove the
SSTs
, install the brake hose, clamp, and brake pipe to the
original positions, and then bleed the air from the brake line. (See
.) (See
.)
© 2012 Mazda North American Operations, U.S.A.
