Page 3 of 17
9/1/2010
Fig. 1-4
Fig. 1-4
b) Grasp A-pillar trim and slide upward.
(Fig. 1-4)
c) Rotate A-pillar trim and allow to hang by tether in
order to gain access to A-pillar. Removal of
retaining clip is not needed.
(Fig. 1-5)
4. Remove driver side sun visor and bracket.
a) Remove two (2) Phillip’s screws from inner
bracket.
(Fig. 1-6)
b) Remove sun visor.
c) Remove one (1) Phillip’s screw from outer bracket.
(Fig. 1-7)
d) Remove sun visor bracket.
Fig. 1-5
NOTE
!
During reassembly, ensure retaining clip is aligned with slot in A-
pillar.
Phillip’s
Screw
Fig. 1-6
Phillip’s
Screw
Fig. 1-7
Retaining Clip
