1. Trim excess off all tie wraps.
9
Installation of Removed Components
User Guide
Fig. 9-1
2. Reinstall in reverse order, all trim pieces removed
during installation.
3. Place User Guide in vehicle
glove-box. (Fig. 9-1)
4. Remove fingerprints, smudges, dirt, etc. from mirror.
5. Verify each reinstalled component for proper fit and
function.
10
Compass Zone Adjustment (Dealer Install ONLY)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
2
3
4
5
6
7
8
9
10 11
12
13
14
Fig. 10-1
1. Adjust compass zone after EC mirror installation.
a) The zone setting is factory preset to Zone 8.
Refer to Compass Calibration Zone Map
(Fig. 10-1)
to find correct compass zone setting
for your geographical location. Use same map
from User Guide.
b) To change the zone setting, push and hold the
right button until a number appears in the display.
Press button repeatedly until desired compass
zone number is reached.
11
Compass Calibration (Dealer Install ONLY)
1. Calibrate compass.
a) Drive to an open, level area, away from large
metallic objects or structures.
b) Hold the power button for approximately 9
seconds until “C” text appears in the display.
Release the right button to enter the calibration
mode.
c) Drive slowly in up to 3 circles until the “C”
disappears, and a directional heading is
displayed. The compass is now calibrated.
Page 14 of 17
9/1/2010
