Maytag Epic MED/GD9600S, Техническое образование

Страница: 18 / 75

2-9
12
Connect ground wire (green or bare) of direct wire cable to
external ground conductor screw. Tighten screw.
32
Place the hooked ends of the other direct wire cable wires
under the outer terminal block screws (hooks facing right).
Squeeze hooked ends together. Tighten screws.
42
Tighten strain relief screw.
52
Insert tab of terminal block cover into slot of dryer rear panel.
Secure cover with hold-down screw.
62
You have completed your electrical connection. Now go to
“Venting Requirements.”
12345678968497936577895
7899998999
992
2
Loosen or remove center silver-colored terminal block screw.
2
Connect neutral wire (white or center wire) of power supply
cord to the center, silver-colored terminal screw of the
terminal block. Tighten screw.
12
Connect the other wires to outer terminal block screws.
Tighten screws.
32
Tighten strain relief screws.
42
Insert tab of terminal block cover into slot of dryer rear panel.
Secure cover with hold-down screw.
52
You have completed your electrical connection. Now go to
“Venting Requirements.”
12345678968497456873456
7899998999
992
Direct wire cable must have 5 ft (1.52 m) of extra length so dryer
can be moved if needed.
Strip 3
1 2
/ " (8.9 cm) of outer covering from end of cable. Strip
insulation back 1" (2.5 cm). If using 3-wire cable with ground
wire, cut bare wire even with outer covering. Shape ends of wires
into a hook shape.
12 34567897885776
2 787676687976677
2 2 !"#565798766
$2 68567%67&76567!89'76
32 (65797876
)2 (657976*5676856776
12 +&76766596(3,156-&+-.
2 +&76
2 (657978
$2 /96567!895*578668
32 2 !"#565798766
)2 .8567!89
2 (6579*5676856776
12 34567897885776
2 (65797876
2 68567%67&76567!89'76
$2(657976*5676856776
32 2 !"#565798766
1