Maytag Amana VZC20, Инструкция по установке и обслуживанию

Страница: 46 / 60

46
7. Select CHARGE MODE.
8. Select ON. Press DONE to initiate CHARGE mode.
(System will then run for 1 hour and either return to
cooling or heating mode depending on the mode
thermostat is set at COOL or HEAT, or stop if the
thermostat is set for FAN only mode.)
If charging is not complete after 1 hour, repeat
7. and 8.
Refer to “Adjust Refrigerant Level” and “Measure
Subcooling to Verify Proper Charge” for refrigerant
charge level adjustment.
9. To terminate CHARGE MODE, select CHARGE
mode screen again. Press OFF. Press DONE to
terminate CHARGE MODE.
10. Once CHARGE MODE is complete and has been
terminated, navigate to HOME screen. Enter
normal operation with temperature offset or thermostat
schedule, as desired.