6
6. Zorg ervoor dat de verstelbare poten stevig staan en zet het apparaat iets schuin
naar achteren om de deuren goed gesloten te houden.
BEDIENINGSINSTRUCTIES
Plaatsing van voedsel
1. Er moet altijd wat ruimte zijn tussen de voorwerpen binnenin voor
luchtcirculatie.
2. Voedsel moet in een gesloten verpakking worden bewaard om
te voorkomen dat het uitdroogt of gaat geuren.
3. Heet voedsel moet worden afgekoeld voordat het in het apparaat
wordt geplaatst anders zullen de binnentemperatuur en het
elektriciteitsverbruik stijgen.
4. Verminder de frequentie van het openen van de deur om
het elektronische verbruik efficiënt te verlagen.
WAARSCHUWING
Gebruik geen elektronische apparatuur in het toestel.
Instructie voor gebruik
De temperatuur van de koelkast kan handmatig worden geregeld
met de draaiknop. Het getal op de knop geeft echter niet direct de
temperatuur weer. Hoe groter het getal, hoe lager de binnentemperatuur
zal zijn. 0 staat voor uit. Zet de knop in stand 4 als de koelkast normaal
wordt gebruikt, in stand 4-7 als een lagere binnentemperatuur gewenst is;
in stand 1-4 daarentegen als een hogere temperatuur gewenst is.
VERPAKKING EN VERHUIZING
1. Uitpakken, opnieuw inpakken en transporteren.
Onthoud de positie van elk accessoire van het apparaat
wanneer u het product uitpakt of herpakt en controleer het
zorgvuldig voordat u het vervoert.
2. Til de deur of de deurgreep niet op of trek er niet aan tijdens het vervoer.
3. Bij het verplaatsen mag het apparaat niet schuiner staan dan
45 graden (de hoek ten opzichte van de verticale richting).
Vermijd sterke trillingen en stoten.
ONDERHOUD
Het toestel moet regelmatig onderhouden en gereinigd worden. Voor uw veiligheid,
gelieve de stekker uit het stopcontact te trekken alvorens het toestel te reinigen.
1. Onderhoud binnenzijde.
Reinig de binnenkant van het apparaat met schoon water of een neutraal
schoonmaakmiddel. Schrob het apparaat met zuiver water en veeg het af met
een droge doek.
2. Onderhoud van de deurpakking.
De pakkingen van de deur kunnen gemakkelijk beschadigd worden als ze vervuild
zijn door vlekken zoals olie, saus, enz.
3. Onderhoud van de buitenkant.
Veeg het stof af met een droge doek, reinig het indien nodig met een neutraal
schoonmaakmiddel.
4. Het apparaat is uitgerust met een schroeflamp of een LED-binnenverlichting met
lange levensduur. (Schroeflamp kan door professionals worden vervangen. LED
met lange levensduur is niet vervangbaar).
5
4
INSTRUCTION FOR USAGE
Unpack , repack and carry
Please memorize the position of each accessory of the appliance
when unpack it, repack the product and check it carefully before
transportation.
Do not lift or pull the door or the door handle during transportation.
When moving, the appliance can not be sloped over 45 degrees
(the angle to the vertical direction). Please avoid strong vibration
and hit.
PACKING AND MOVING
1.
2.
3.
The appliance should be maintained and cleaned frequently. For your safety,do
please pull the plug out of the socket before the cleaning.
Interior maintenance
Clean the interior of the appliance with clean water or neutral abluent.Scour it with
clean water and wipe it with a piece of dry cloth.
Maintenance of door gasket
It is easy to damage if the door gaskets are polluted by the stain like oil, sauce and
etc., so it is better to clean them carefully.
Outer maintenance
Wipe the dusty with a piece of dry cloth ,clean it with neutral abluentif necessary.
MAINTENANCE
1.
2.
3.
Do not use any electronic equipment inside the appliance.
Warning
The refrigerator should be located in a completely flat surface , Leave 5~10 cm
between each side of the appliance and the wall, and leave 30 cm between the top
of the appliance and the ceiling.
Choose a location which is not exposed to sunlight ,
high temperature or humid , as humidity maycause stain.
Pulled out the bottom panel before installation.
The appliance can be adjusted by rolling its two legs in
front the bottom when it is unstable. Rolling in clockwise
can rise up the machine.
The location should be firm and flat. An un-securely
position may cause noise and libration:
(a)The noise may be increased if the floor is not firm.
(b) Put a sheet under the appliance for solving the heat
emission if you need to locate it onto a carpet.
Make sure the adjustable legs are clung to the floor,
and set the appliance slope backward slightly for keeping the doors closed tightly.
PLACEMENT OF FOOD
INSTALLATION INSTRUCTIONS
OPERATION INSTRUCTIONS
1.
2.
3.
4.
5.
6.
There should always be some space between items inside for air circulation.
Food should be
to avoid becoming
dry or with odour.
kept in sealed package
Hot food should be cooled down before placing into the
appliance. Otherwise, interior temperature and electronic
consumption will increase.
Reduce the frequency of door opening can efficiently low
down the electronic consumption.
1.
2.
3.
4.
The temperature of refrigerator can be controlled manually by the
knob. However, the number shown on the knob does not directly
represent the temperature. Instead, the larger the number is, the lower
the interior temperature will be. 0 stands for off. Turn the knob to state
4 when it is normal used, turn it to the state during 4-7 if a lower interior
temperature is required; contrarily, to the state during 4-1, when a
higher one is needed.
5
4
INSTRUCTION FOR USAGE
Unpack , repack and carry
Please memorize the position of each accessory of the appliance
when unpack it, repack the product and check it carefully before
transportation.
Do not lift or pull the door or the door handle during transportation.
When moving, the appliance can not be sloped over 45 degrees
(the angle to the vertical direction). Please avoid strong vibration
and hit.
PACKING AND MOVING
1.
2.
3.
The appliance should be maintained and cleaned frequently. For your safety,do
please pull the plug out of the socket before the cleaning.
Interior maintenance
Clean the interior of the appliance with clean water or neutral abluent.Scour it with
clean water and wipe it with a piece of dry cloth.
Maintenance of door gasket
It is easy to damage if the door gaskets are polluted by the stain like oil, sauce and
etc., so it is better to clean them carefully.
Outer maintenance
Wipe the dusty with a piece of dry cloth ,clean it with neutral abluentif necessary.
MAINTENANCE
1.
2.
3.
Do not use any electronic equipment inside the appliance.
Warning
The refrigerator should be located in a completely flat surface , Leave 5~10 cm
between each side of the appliance and the wall, and leave 30 cm between the top
of the appliance and the ceiling.
Choose a location which is not exposed to sunlight ,
high temperature or humid , as humidity maycause stain.
Pulled out the bottom panel before installation.
The appliance can be adjusted by rolling its two legs in
front the bottom when it is unstable. Rolling in clockwise
can rise up the machine.
The location should be firm and flat. An un-securely
position may cause noise and libration:
(a)The noise may be increased if the floor is not firm.
(b) Put a sheet under the appliance for solving the heat
emission if you need to locate it onto a carpet.
Make sure the adjustable legs are clung to the floor,
and set the appliance slope backward slightly for keeping the doors closed tightly.
PLACEMENT OF FOOD
INSTALLATION INSTRUCTIONS
OPERATION INSTRUCTIONS
1.
2.
3.
4.
5.
6.
There should always be some space between items inside for air circulation.
Food should be
to avoid becoming
dry or with odour.
kept in sealed package
Hot food should be cooled down before placing into the
appliance. Otherwise, interior temperature and electronic
consumption will increase.
Reduce the frequency of door opening can efficiently low
down the electronic consumption.
1.
2.
3.
4.
The temperature of refrigerator can be controlled manually by the
knob. However, the number shown on the knob does not directly
represent the temperature. Instead, the larger the number is, the lower
the interior temperature will be. 0 stands for off. Turn the knob to state
4 when it is normal used, turn it to the state during 4-7 if a lower interior
temperature is required; contrarily, to the state during 4-1, when a
higher one is needed.
5
4
INSTRUCTION FOR USAGE
Unpack , repack and carry
Please memorize the position of each accessory of the appliance
when unpack it, repack the product and check it carefully before
transportation.
Do not lift or pull the door or the door handle during transportation.
When moving, the appliance can not be sloped over 45 degrees
(the angle to the vertical direction). Please avoid strong vibration
and hit.
PACKING AND MOVING
1.
2.
3.
The appliance should be maintained and cleaned frequently. For your safety,do
please pull the plug out of the socket before the cleaning.
Interior maintenance
Clean the interior of the appliance with clean water or neutral abluent.Scour it with
clean water and wipe it with a piece of dry cloth.
Maintenance of door gasket
It is easy to damage if the door gaskets are polluted by the stain like oil, sauce and
etc., so it is better to clean them carefully.
Outer maintenance
Wipe the dusty with a piece of dry cloth ,clean it with neutral abluentif necessary.
MAINTENANCE
1.
2.
3.
The appliance is equipped with a screwing lamp or a long life LED interior light.
(Screwing lamp can be replaced by professionals.Long life LED is non-replaceable).
4.
Do not use any electronic equipment inside the appliance.
Warning
The refrigerator should be located in a completely flat surface , Leave 5~10 cm
between each side of the appliance and the wall, and leave 30 cm between the top
of the appliance and the ceiling.
Choose a location which is not exposed to sunlight ,
high temperature or humid , as humidity maycause stain.
Pulled out the bottom panel before installation.
The appliance can be adjusted by rolling its two legs in
front the bottom when it is unstable. Rolling in clockwise
can rise up the machine.
The location should be firm and flat. An un-securely
position may cause noise and libration:
(a)The noise may be increased if the floor is not firm.
(b) Put a sheet under the appliance for solving the heat
emission if you need to locate it onto a carpet.
Make sure the adjustable legs are clung to the floor,
and set the appliance slope backward slightly for keeping the doors closed tightly.
PLACEMENT OF FOOD
INSTALLATION INSTRUCTIONS
OPERATION INSTRUCTIONS
1.
2.
3.
4.
5.
6.
There should always be some space between items inside for air circulation.
Food should be
to avoid becoming
dry or with odour.
kept in sealed package
Hot food should be cooled down before placing into the
appliance. Otherwise, interior temperature and electronic
consumption will increase.
Reduce the frequency of door opening can efficiently low
down the electronic consumption.
1.
2.
3.
4.
Содержание 21225
Страница 98: ...98...