Maxx Ice MIM250, Руководство по обслуживанию, установке и инструкция

Страница: 4 / 56

3
IMPORTANT SAFEGUARDS
Before the ice maker is used, it must be properly positioned and installed as described
in this manual, so read the manual carefully We strongly recommend that you have
a professional install your new machine The warranty may be affected or voided
by an incorrect installation. To reduce the risk of fire, electrical shock or injury when
using the ice maker, follow basic precautions, including the following:
• Plug into a grounded 3-prong outlet Do not remove grounding prong, do not use an adapter,
and do not use an extension cord
• It is recommended that a separate circuit, serving only your ice maker, be provided Use
receptacles that cannot be turned off by a switch or pull chain
• Do not connect or disconnect the electric plug when your hands are wet
• Never unplug the ice maker by pulling on the power cord. Always grip the plug firmly and pull
straight out from the outlet
• Never clean ice maker parts with flammable fluids. Do not store or use gasoline or other
flammable vapors and liquids in the vicinity of this or any other appliance. The fumes can create
a fire hazard or explosion.
• Before proceeding with cleaning and maintenance operations, make sure the power line of the
unit is disconnected and the water line is shut off (EXCEPTION: When cleaning the machine’s ice
making and water systems)
• Before operating, put all the enclosure panels back into their original places
• Do not touch the evaporator with your hand when the machine is operating
• Unplug the ice maker or disconnect power before cleaning or servicing Failure to do so can
result in electrical shock or death
• Do not attempt to repair or replace any part of your ice maker unless it is specifically recommended
in this manual. A qualified technician should do all other servicing.
• Use two or more people to move and install ice maker Failure to do so can result in back or
other injury
• To ensure proper ventilation for your ice maker, the front of the unit must be completely
unobstructed Choose a well-ventilated area with temperatures above 50ºF (10ºC) and below
100ºF (38ºC) This unit MUST be installed in an area protected from the elements, such as wind,
rain, water spray or drips
• The ice maker should not be located next to ovens, grills or other sources of high heat
• The ice maker must be installed with all electrical and water connections in accordance with
state and local codes A standard electrical supply (220-240 VAC, 50 Hz, 15 A), properly grounded
in accordance with the National Electrical Code and local codes and ordinances, is required
• Do not kink or pinch power supply cord or drain lines between ice maker and cabinet
• The fuse (or circuit breaker) size should be 15 amperes
• It is important for the ice maker to be leveled in order to work properly You may need to make
several adjustments to level it
• All installations must be in accordance with local plumbing code requirements
• Make certain that the hoses are not pinched or kinked or damaged during installation
• Check for leaks after connection
• Remove the packing materials and clean the ice maker before using
• Turn on the water supply tap before switching on the ice maker Never turn the water supply tap
off when the ice maker is working
DANGER
WARNING
CAUTION
DANGER
WARNING
CAUTION
DANGER
WARNING
CAUTION