58
Chapter 6 Operation Guide
1.Loosen the locking screw of the
protective lens holder shell
4. Gently wipe the front of the
lens with a clean cotton swab or
clean cloth dipped in alcohol
2.Take out the protective lens
holder
5. Take out the protective mirror
holder and wipe the other side of
the protective mirror
use the side blowing method to avoid the dirt from sneaking into the surface.
◎
If the protective lens holder cannot be put back on the optical components
immediately, please seal the lens cavity shell with textured paper.
3.Masking paper package to
protect the lens seat cavity
6. Put the protective mirror into
the protective mirror holder, push
it into the protective mirror holder
cavity, and tighten the screws
