38
Chapter 5
Disassembly Guide
1-Disassembly Step
If the packaging shows any signs of external damage, inspect the unit for
damage and notify the shipping agent immediately. When you take the unit out
of the box, take extra care to ensure that the fibers are not broken or damaged.
A comprehensive packing list is included with the system documentation.
After receiving the product, please check all items against this list, if any item
is missing or the unit is obviously damaged, please contact Maxphotonics
immediately. Do not attempt to install or operate a laser unit under any
circumstances if the unit is visibly damaged or suspected of being damaged.
Lasers are precision valuables. Maxphotonics recommends that you follow
the steps below to disassemble and pack the boxes:
(1) Place the equipment of this product on a flat floor according to the packaging
box logo.
(2) Step by step according to the logo of the top cover packing box, and remove
the top foam shielding plate after dismantling.
(3) The laser has an optical fiber cable connected to the gun head, please take it
out carefully to ensure that the bending radius of the optical fiber armored cable
is >175mm.
(4) Remove the foam shield and take out the supporting items.
(5) Please check the accessories against the "Packing List".
