19
Chapter 2 General Safety
Information
When the temperature of the laser is too high, the device will trigger an alarm
and stop emitting light.
To ensure a safe laser work area, the interaction between the laser and the work
surface, which can create additional safety hazards due to the high temperatures
that generate gases, sparks and debris. The corresponding operators need to
go through certain assessment and training, and be familiar with and master the
general safety regulations of laser operation.
Maxphotonics recommends that you take the following measures to
prolong the service life of the handheld laser welding machine:
(1) Please ensure that the working area is properly ventilated and place the
hand-held laser welding machine in a dry, cool and clean environment. Do not
expose the hand-held laser welding machine to high temperature, high humidity,
and water hazards.
(2) During the operation of the hand-held laser welding machine, ensure that
there is no foreign matter blocking the air suction port at the bottom of the laser,
and ensure that there is no debris within 1 meter that affects the smooth air
intake; ensure that the top air outlet is 1M high.
(3) It is necessary to ensure that no debris (including liquid) on the top enters
the laser, otherwise it will damage the laser and cause personal injury;
(4) Running the equipment at high temperature will accelerate aging, increase
the current threshold, and reduce the sensitivity and conversion efficiency of the
handheld laser welding machine. If the device overheats, please stop using it
and seek help from Maxphotonics.
NOTICE :
◎ Please operate the equipment carefully to avoid accidental damage to the
equipment.
