16
Chapter 2 General Safety Information
(2) Avoid placing the hand-held laser welding machine and related optical output
devices on the same level as the eyes;
(3) Reasonable selection of safety protective equipment according to the output
power and wavelength requirements of the handheld laser welding machine to
ensure the safety of operators;
(4) A warning sign should be pasted in the area where the handheld laser
welding machine is placed to limit the safe area for operating the handheld laser
welding machine;
(5) Do not use the handheld laser welding machine in a dark environment;
(6) It is strictly forbidden to turn on the hand-held laser welding machine without
installing the optical coupling fiber or optical output connector;
(7) Please ensure that the protective lens, copper nozzle and wire feeding
structure are installed and cleaned when the handheld laser welding machine is
turned off and the power supply is disconnected;
(8) When debugging, calibrating and focusing, please do it without the laser, and
turn on the laser after the debugging is completed;
(9) Please operate the equipment strictly in accordance with the instructions
in this document, otherwise the protection device and performance of the
equipment will be impaired, and Maxphotonics will not guarantee this.
NOTICE:
◎
The optical output of the hand-held laser welding machine will be sent
out after receiving the lens with anti-reflection coating. Dust and any other
debris present. Any visible attachments will cause serious damage to the lens,
resulting in burning the handheld laser welding machine or any subsequent
optical path equipment.
◎
Please refer to the "Optical Fiber Connector Inspection and Cleaning Guide"
