Maxon GPTLR-25, Руководство по установке

Страница: 16 / 90

1
1921 Slauson
A
ve. Santa Fe Springs, CA. 90670 (800) 227-41
16 F
AX (888) 771-7713
16
STEP 1 - ATTACH EXTENSION PLATE TO VEHICLE
1.
Mark and drill holes into rear sill as shown in
FIGS. 16-1 and 17-1
.
REAR SILL - HOLE LOCATIONS FOR 96” WIDE VEHICLE
FIG. 16-1
USE 9/16” DRILL
(19 PLACES)
1-1/4”
3-1/8”
REAR
SILL
1-1/2”
19”
24”
14”
34”
41”
48”
55”
62”
72”
77”
82”
94-1/2”
96”
BOLT EXTENSION PLATE
NOTE:
Liftgate extension plate comes with bolt holes so it can be bolted to vehicle
body with optional bolt kit.
GRADE 8 bolts are required. MAXON
recom-
mends getting the optional extension plate hardware kit listed in
OPTIONS
section. Vehicle body must be drilled according to instructions. Extension
plate may also be welded to vehicle body. Do the following bolting or weld-
ing instructions for the extension plate.
CAUTION
To preserve the corrosion-resistant properties of the galvanized fi nish,
MAXON recommends bolting the galvanized extension plate to vehicle.
CAUTION
6-1/2”
6-1/2”
1-1/2”
1-1/4”