maxon motor
EPOS 24/5 Getting Started
EPOS Positioning Controller
4.
‘Startup Wizard’ Step 2: Communication Setting!
a)
Verify that your RS-232 wiring is correct.
Please refer to chapter
‘6.3 Step 3: Minimum External Wiring’
b)
Click on the button ‘Search Communication Setting’ to search the
used COM port and the adjusted baudrate automatically.
Figure 10: Startup wizard dialog for setting RS-232 communication
c)
If a correct communication setting is found, the following dialog is
displayed.
Figure 11: Communication settings found
d)
Click on the ‘OK’ button to confirm and accept the values.
e)
Click on the button ‘Weiter’ for the next step.
5.
‘Startup Wizard’ Step 3: Motor Type
a)
Select the used motor type.
Figure 12: Startup wizard dialog for choosing motor type
b)
Click on the button ‘Weiter’ for the next step.
1
It is also possible to run ‘EPOS User Interface’ via CANopen communication. In this case, a PC CAN- interface card from IXXAT or
Vector has to be used.
For correct wiring please see ‘EPOS 24/5 Hardware Reference’ document.
December 2008 Edition / document number 573050-07 / subject to change
maxon motor control
15
