maxitrak 5 Inch Gauge Alice, Руководство по монтажу, Страница: 9 / 18

info@maxitrak.co.uk Copyright maxitrak 2010
Once complete run through a test procedure, fill the tanks, work the pumps, check for leaks. Fill
the boiler right to the brim with water and carry on with pumping. This will bring the pressure up
on the pressure gauge. You can check for leaks, (the odd weep on a fitting may be expected) and
you can set the safety valve to go at 80 PSI. Once complete you can test run the engine on air or
steam.
Finishing touches, you can buy from maxitrak touch up paint in the right colours for touching up
nut’s & bolts, and its a good idea to give all the body colour parts a good coat of wax so it has
protection against water and oil from day to day running.
Any question please contact us on 01580 893030