maxitrak 5 Inch Gauge Alice, Руководство по монтажу, Страница: 8 / 18

info@maxitrak.co.uk Copyright maxitrak 2010
1
6
. Next fit the cab back, just two M4 nuts are required to hold this in place when the hand rail
ends have been put through the back footplate.
NB This item is easily removable for driving.
17.
Fit the couplers front and rear, smaller M5 to the front, larger M6 to the rear.
18
. Last job is to fit the grate and ash pan. Check the grate goes easily into the bottom of the
firebox. File off the grate as required so this is lose fit, it needs to go right in, the bottom of the
grate is level with the bottom of the firebox. Next fit the front ash pan support to the brake cross
member. This support is a circular brass piece, it comes into two halves and can be fitted round the
brake cross shaft without doing any disassembly.
Now try the ash pan in place under the firebox, positioned so the two cross bars on the ash pan
hold the grate in place. The front of the ash pan needs to be tight up against the circular ash pan
support. Once you are happy with the position mark through the hole in the frame on to the ash pan
both sides. Remove the ash pan and drill 4mm dia, refit to check the positions are correct.