maxitrak 5 Inch Gauge Alice, Руководство по монтажу, Страница: 6 / 18

info@maxitrak.co.uk Copyright maxitrak 2010
11.
The hand brake stand and handle can now be fitted through the footplate and angle bracket on
the right hand side. The screwed end of the handle goes into the brake lever on the chassis, directly
under the brake handle.
12
. The hand pump is fitted to the holes in the left foot plate, bend up the pipe to go from the top
of the pump to the check valve on the left of the regulator. The longer hand pump pipe is bent in a
tight curve to lay along side the pump base and then turns up to match the feed from the tank.
Pipes B and C.
13
. The blower pipe (D) can be bent to shape so as to run from the blower valve down the side of
the firebox and along the boiler under where the tank sits. It is then bent to go round the smoke box
and in through the hole in the side of the smoke box. Inside it needs to be shaped so the nozzle end
lays beside the blast pipe and points directly at the base of the chimney. Hold it in place with a
twist of copper wire round the blast pipe.