Maximum 055-9033-8, Инструкция по эксплуатации

Страница: 3 / 43

2
1
3
2 2
1
1
4
2
3
5
model no. 055-9033-8 | contact us 1-800-689-9928
SPECIFICATIONS
model no. 055-9033-8 | contact us 1-888-670-6682
4
QUICK
S
T
ART GUIDE
•
This jobsite table saw is designed to cut wood and wood composition products only.
The tool can be used for the cross cut, rip cut, mitre cut, bevel cross cut, bevel rip cut
and compound (bevel) mitre cut.
CAUTION!
• Read and understand the following instructions to get the
best use of the table saw cutting function.
Motor
Speed
Blade
Main table size
Depth of cut @ 90° (max.)
Depth of cut @ 45° (max.)
Rip capacity
Bevel range
Mitre gauge range
Maximum load
Weight
120V, 60 Hz, 15A
(soft start and constant speed)
3100 RPM (no-load, constant speed)
10” (25.4 cm) 40-tooth carbide-tipped
26 3/8 x 22" (67 x 56 cm)
3 1/8" (7.9 cm)
2 5/32" (5.5 cm)
33" (83.8 cm) right; 19" (48.2 cm) left
0–45°
0–60° (right and left)
77 lb (35 kg)
90.97 lb (41.3 kg)
SPECIFICATIONS
Attach the stand assembly (1) to
the table saw assembly (2) with
four flat round head screws
M8 x 45 (3) and four locking nut
M8 (4) (two holes on the side
board of the stand assembly
located on the blade wrench
storage).
see page 31.
•
•
(1)
(2) Loosen the locking knobs (2)
under the working table
counter-clockwise. Stand behind
saw. Grasp outfeed support (1)
with both hands and pull until it is
fully extended.
Tighten the locking knobs (2)
clockwise.
see page 55.