ASSEMBLY
33
32
model no. 055-9033-8 | contact us 1-800-689-9928
model no. 055-9033-8 | contact us 1-888-670-6682
ASSEMBLY
2
5
6
Fig. 2b
Fig. 2c
Fig. 2d
•
Attach the tubes of the stand support
assembly (5) with the corresponding tubes
(located on side of blade wrench storage) on
the stand assembly (2) and align the holes.
Insert the flat round head screws M8 x 10 (6)
into the hole and tighten with 5 mm hex key.
(Fig. 2b)
•
Slide one wheel (7), one big flat washer 10 (8)
and one locking nut M10 (9) onto the wheel
shaft (10). Secure wheel in place by tightening
the locking nut M10. Repeat with the second
wheel. (Fig. 2c)
•
Attach the wheel assembly (11) to the stand
assembly (2) with two flat round head screws
M8 x 100 (12) and two locking nut M8 (4).
(Fig. 2d)
•
Attach the tubes of the handle I assembly (14)
with the corresponding tubes (located on side
of blade guard storage) on the stand
assembly (2) and align the holes. Insert the
flat round head screws M8 x 10 (6) into the
hole and tighten with 5 mm hex key. (Fig. 2e)
OPEN THE STAND (Fig. 3a-3d)
•
•
Lock the fence rail using fence rails lever (1).
Grasp the handle I (2) and tilt saw back onto
wheels until the stand is balanced on the
wheels (3) and stand support assembly (4).
(Fig. 3a)
Fold out two upper stand legs (5) (located on
side of the handle I). To do this, push the
locking pins (6) until they unlock the stand
legs (5) from the holes, then swing the stand
legs (5) upward until the stand legs (5) are
locked with the locking pins (6) engaging the
holes. (Fig. 3a)
•
Grasp the handle I (2) firmly and slowly tilt
saw to you until the saw is balanced on the
ground. (Fig. 3b-3c)
9
7
10
8
12
11
4
14
6
Fig. 2e
Fig. 3a
Fig. 3b
2
2
5
3
2
4
6
1
Содержание 055-9033-8
Страница 1: ......
