13
®
INSTALL THE MOTOR IN THE FIXED
BASE (fig 3)
1. Disconnect the plug from the power
supply.
2. Place the fixed base on a flat surface.
3. With the back of the fixed base facing
you, open the motor clamp.
4. Press the coarse-adjustment button
while you align the motor to the fixed
base so that the arrows align.
5. Slide the motor down into the fixed base.
6. The router motor will now slide up or down when the coarse-adjustment
button is pressed in.
7. After all adjustments are made, close the motor clamp securely.
REMOVE THE MOTOR FROM THE FIXED BASE (fig 3)
1. Disconnect the plug from the power supply.
2. Place the router on a flat surface.
3. With the back of the router facing you, open the motor clamp.
4. Push in the coarse-adjustment button while you lift the router motor out of
the fixed base.
INSTALL THE MOTOR IN THE PLUNGE
BASE (fig 4)
1. Disconnect the plug from the power
supply.
2. Place the plunge base on a flat surface.
3. With the back of the plunge base
facing you, open the motor clamp and
make sure that the plunge action is in
the “DOWN” position with the plunge-
depth locking lever locked.
4. Align the arrow on the motor housing with the arrow on the plunge base, and
then lower the motor housing into the plunge base.
5. Slide the motor into the base as far as it will go.
6. Close the motor clamp securely.
REMOVE THE MOTOR FROM THE PLUNGE BASE (fig 4)
1. Disconnect the plug from the power supply.
2. Place the router on a flat surface.
3. With the back of the plunge base facing you, open the motor clamp and make
sure that the plunge action is in the “DOWN” position, with the plunge-depth
locking lever locked.
4. Lift the motor straight up out of the base.
OPER
A
TING INS
TRUCTIONS
fig 3
Locking
nut
Coarse-
adjustment
button
Motor
clamp
Arrow
fig 4
Motor
clamp
Locking nut
Locking
lever
Arrow
