8
model no. 054-2433-0 | contact us 1-888-670-6682
ADDITIONAL SAFETY GUIDELINES FOR THE ROUTER
• The label on your tool may include the following symbols. The symbols and
their definitions are as follows:
V ..................... Volts
A ..................... Amperes
Hz ................... Hertz
W .................... Watts
min ................. Minutes
................. Alternating current
n
0
................... No-load speed
...............
Class II Construction
…/min or …min
-1
.............. Revolutions or reciprocations per minute
RPM…….......
Revolutions per minute
..............
WARNING–To reduce the risk of injury, user must read
instruction manual.
..............
WARNING–To reduce the risk of injury, always wear eye
protection.
..............
WARNING–To reduce the risk of injury, always wear ear
protection.
• Always make sure the work surface is free from nails and other foreign objects.
Cutting into a nail can cause the bit and the tool to jump and damage the bit.
• Never hold the workpiece in one hand and hold the tool in the other hand
when in use. Never place hands near or below the cutting surface. Clamping
the material and guiding the tool with both hands is safer.
• Always wear safety goggles and dust mask. Use only in a well-ventilated area.
Using personal safety devices and working in a safe environment reduces risk
of injury.
• Keep handles dry, clean and free from oil and grease. Slippery hands cannot
safely control the power tool.
• Never start the tool when the bit is engaged in the material. The bit cutting
edge may grab the material causing loss of control of the cutter.
• The router may make a big noise during routing; wear ear protection while
operating.
• Only use router bits with higher speed than the no-load speed of the tool.
S
AFETY GUIDELINES
